Showing 1–12 of 106 results
⚙️ Core Specs (typical 27″ 10HP / 302cc class) Engine: 10 HP / ~302cc single-cylinder gas engine Cutting width: 27 inches Drive: Self-propelled (wheeled or tracked versions) Transmission: 3 forward + 1 reverse gear system Cutting system: ~30–40 Y-shaped flail blades Cut height: ~0.8″ to 3.2″ (varies by model) Slope capability: up to ~30° (wheeled…
🌿 What it is Unlike a finish mower or reel mower, a brush mower uses: One or two large heavy blades A heavy steel deck PTO-driven gearbox Category 1 or Category 2 three-point hitch Its purpose is to cut: Tall grass Dense weeds Brush Small saplings Field overgrowth 👍 What it’s good at ✔ Land…
⚙️ Typical specifications For a VAM48-class mower: Cutting width: 48 inches (4 ft) Tractor requirement: 20–50 HP 3-point hitch: Category I PTO: 540 RPM Offset operation: Yes Flail type: Usually hammer flails or Y-knives Application: Ditches, field edges, orchards, embankments 👍 Strengths ✔ Excellent for canal banks and ditches This is one of the best…
⚙️ Key specifications (typical for this class) Working width: 63 inches Tractor requirement: 50–75 HP PTO: 540 RPM standard (1.375″ Z6 spline) Hitch: Category 2, 3-point Blade type: Hammer flails (heavy-duty steel) Cutting height: ~0–3 inches (adjustable skid/roller) Hydraulic side shift: ~10–13 inches lateral offset Weight: ~1000–1200 lb range Deck: heavy steel, belt-driven rotor system
🔧 Key specs (based on typical 6FT 4-disc models) Working width: ~6 ft (about 5.1 ft cutting width actual) Discs: 4 rotating discs Blades: usually 8 free-swinging knives PTO requirement: 540 RPM Tractor power needed: ~35–80 HP Hitch type: 3-point Cat 2 Weight: ~450–550 kg (1000+ lb range on many models) Cutting speed: fast field…
📊 Key specs (typical 72″ finish mower class) Based on common models (Farm-Maxx / TMG / Bobcat / similar): Cutting width: 72 inches (6 ft) HP requirement: ~25–50 HP tractor PTO speed: 540 RPM standard Cut height: ~1″ to 4″ adjustable Blades: 3 high-speed rotating blades Deck: heavy steel (usually 11–3/16 gauge range) Weight: ~500–600…
Key Specifications Engine: 13 HP Honda GXV390 (recoil start) Cutting Width: 26 inches Transmission: Hydrostatic/hydro-transaxle with instant forward and reverse Ground Speed: Variable, up to about 4 mph Blade: Heavy-duty dual-sided brush blade Deck: 10-gauge steel construction Weight: Approximately 300 lb Cutting Capacity: Brush and saplings up to about 2″ diameter Safety: Operator-presence control system
⚙️ Key features (typical systems) Mounting: Boat bow, side arm, or pontoon frame Cutting system: Sickle bar / rotating cutter / submerged blade head Cut depth: Adjustable (commonly 0.5–2 meters underwater) Power source: Gas engine or hydraulic PTO (boat/engine driven) Working width: ~3–10 feet depending on model Use environment: Lakes, ponds, canals, irrigation waterways Operation:…
🔧 Key specs (Ariens APEX 23HP Kohler) Most common configuration (48″ or 52″): Engine: Kohler 7000 Series V-Twin, 23 HP (≈725cc) Deck: 48″ or 52″ fabricated steel (10-gauge, ~5.5″ deep) Transmission: Hydro-Gear ZT-3100 (serviceable, stronger than entry ZT drives) Speed: up to ~8 mph forward, ~4 mph reverse Frame: fully tubular steel (very strong chassis…
Feature Specification Model Ariens Razor 21 FWD (911608) Engine Briggs & Stratton EXi725 Engine Size 163cc Drive Type Front-Wheel Drive Self-Propelled Ground Speed Approximately 1–4 MPH Cutting Width 21 in. Deck Material 14-Gauge Steel Deck Depth 5.5 in. Deep Deck Cutting Height 1–4 in. Height Positions 7 Mowing Modes Mulch, Bag, Rear Discharge Fuel Tank…
🚜 Bad Boy Magnum 60 (24 HP Kohler) Overview 🔧 Key specs Engine: Kohler 7000 KT724, 24 HP (747cc V-Twin) Deck: 60″ fabricated steel deck (7-gauge steel) Transmission: Hydro-Gear EZT / ZT-2200 integrated drives Fuel capacity: ~6 gallons Speed: up to ~6 mph forward Cutting height: ~1.5″ – 4.5″ range (multiple positions) Weight: ~715 lb…
Key Specifications Engine: Briggs & Stratton Intek Series, 344cc Cutting Width: 26 inches (66 cm) Drive: Self-propelled Transmission: 3 forward gears + 1 reverse Deck: Fixed rigid deck Weight: About 316 lb (143 kg) Cutting Capacity: Saplings up to 2 inches (5 cm) diameter Starting System: Recoil start Cut Height: Approximately 3.75 inches (9.5 cm)…
